Newsletter: campaigns & automatic emails

After this article you can send newsletter campaigns to reachable contacts, invite contacts via double opt-in, and activate automatic emails (birthday, win-back).

With the marketing module you send newsletters directly from Univents to your contacts — no external tool, no duplicate list maintenance. You book the module from the Core plan upwards directly in Marketing or under Settings → Billing → Add-on modules.

The video shows how to set up automatic emails for returning customers and birthdays, send campaigns to tag segments and create status emails after the event.

You’ll find the individual steps written out below as well.

Who may be contacted?

For legal reasons, newsletters may only go to contacts with a proper basis. Univents checks this automatically on every send:

  • Existing customer (reachable): The contact has booked with you or received an invoice. Such contacts may be informed about your own similar offers — every email contains an unsubscribe notice for this.
  • Subscribed: The contact confirmed your invitation via confirmation email (double opt-in).
  • Unsubscribed: The contact unsubscribed and will never be contacted again — not even as an existing customer.
  • No basis: Neither an existing customer nor subscribed. You can invite these contacts to confirm.

Inviting contacts to the newsletter

  1. Open Marketing in the sidebar.
  2. Click Invite contacts to the newsletter.
  3. Select the contacts and send the invitations.

Every invited contact receives a confirmation email with a link. The link opens a page where the person still presses the button Anmeldung bestätigen (confirm subscription) — only then are they reachable. The link is valid for 14 days; without confirmation nothing happens.

So that nobody gets mail twice, no second invitation goes out to:

  • contacts whose invitation is still running (not yet confirmed and not expired),
  • addresses that are already subscribed or unsubscribed — even if the same address is also stored on another contact,
  • duplicate addresses: if the same email address belongs to several contacts, it receives only one invitation.

Addresses with special characters, for example an umlaut such as “ö”, are skipped because they cannot be delivered reliably. Correct the address on the contact, then you can invite them. After sending you see how many invitations went out and how many were skipped; invited contacts disappear from the selection list.

Sending a campaign

  1. In Marketing, click New campaign.
  2. Recipients: By default campaigns go to all reachable contacts; optionally filter by tags. The counter shows live how many contacts are reachable — and how many are skipped (no basis, no email address, or merged as duplicates).
  3. Content: Internal name, subject and message. Placeholders for first name and company name personalize every email. Use the toolbar to add images and buttons (see below). With Insert block you add header images, colour blocks and columns; a live preview appears next to the editor (see below).
  4. Test email: Send the campaign to yourself first.
  5. Send: Sending starts within a few minutes and runs in the background.

Afterwards, the campaign detail view shows for every recipient whether the email was sent, skipped or bounced.

Images and buttons

In the Content step you design the message like a real newsletter:

  • Add an image: Click the image icon in the toolbar and pick a file (JPG, PNG, WebP or GIF, up to 5 MB). The image is inserted at most as wide as the email; use the handles on the image to change its size and alignment. In the email it shrinks to the screen width on phones and keeps its size in Outlook too. Only use images you hold the rights to.
  • Add a button: Click Insert button and enter the label and the link (https://… or mailto:…; www.… automatically becomes https://www.…). The button appears in the colour from Settings → Branding. The placeholders for first name and company work in the label as well.
  • Change a button: Click the button in the text, then choose Insert button — label and link are already filled in, and Insert button replaces it.

A button without a valid link can’t be sent: the assistant stays on the Content step and names the button until you’ve added a link.

Logo and footer: Every newsletter and every automatic email shows your logo at the top (without a logo, your workspace name) and your email footer at the bottom — just like your other emails. You manage both under Settings → Branding. Your email signature isn’t added to newsletters; the unsubscribe notice always comes last.

Designing your newsletter: blocks, colours, preview

Besides text, images and buttons, you build your newsletter from blocks. Click Insert block in the toolbar and choose:

  • Header image: A photo across the full width of the email, edge to edge. Ideally a photo at least 1,200 pixels wide.
  • Colour block: A section with a background. Choose the colour from White, Light, Primary colour, Secondary colour (only if set under Settings → Branding) and Dark — all taken from your workspace colours. Text and button adapt automatically.
  • Image beside text: The image sits to the left or right of the text; on phones it sits above.
  • Two columns: Two columns side by side; stacked on phones.

When the cursor is inside a block, a bar appears. There you change the block colour or the column split (Equal, Image left, Image right), move the block with Move up and Move down, or delete it with Remove.

Image placeholders: The templates come with empty image placeholders, but no photos. In a placeholder you choose Upload photo or Remove. You can only continue to the next step once no placeholder is empty; until then the assistant shows “One image placeholder is still empty…”.

Live preview: In the Content step you see the email next to the editor exactly as it arrives — with logo, workspace colours, footer text and unsubscribe notice. Switch between Desktop and Phone; “Anna” is used as the sample first name. Empty image placeholders and buttons without a link are marked in the preview. The test email in the Test email step still works in addition.

What the sent email looks like: It arrives as a card with your logo at the top (centred) and a line in your primary colour. Buttons appear in the primary colour (centred when the text above is centred); footer text and unsubscribe notice sit centred below the card. This also applies to existing drafts and to the automatic emails (win-back, birthday).

Automatic emails

Under Marketing → Automatic emails you can activate two automations:

  • No booking for a while: Customers whose last event was more than 12 months ago automatically receive a friendly reminder — once per pause, never more often.
  • Birthday email: Contacts with a stored birth date automatically receive congratulations on their birthday — once per year.

Both use the same reachability rules as campaigns.

Your own sender domain

By default newsletters go out via the Univents sender address. With your own domain the emails look like they come straight from you:

  1. Open Marketing and enter your domain under Own sender domain — ideally a subdomain such as news.your-domain.com.
  2. Add the displayed DNS records at your hosting provider (wherever your domain is managed).
  3. Click Verify. DNS changes can take a few hours.

Once the domain is verified, all newsletters automatically go out from your address.

Opens and clicks

Each campaign's detail view shows deliveries, opens and clicks — as totals and per recipient. Note: opens are a lower bound because many mail clients block the tracking pixel. Clicks are more reliable.

Saving segments

In the recipients step you filter by tags and activity (e.g. “nothing booked in over 12 months”). Save a filter combination you use often as a segment — for the next campaign you pick it again with one click.

Templates and copying campaigns

In the content step you pick a template as a tile with a thumbnail: seasonal offer, announcement, thank-you, seasonal menu, event announcement and special offer. All six are built from blocks. Where a template contains a button, you only add its link before sending (click the button, then Insert button). The templates come with empty image placeholders, but deliberately no photos — upload your own. Copy an existing campaign from the overview via Duplicate — the copy starts as a new draft.

Sending a draft later: You can reopen a saved draft and send it without retyping anything — drafts in the campaign list carry the action Edit & send, and the draft’s detail page offers it too. The assistant opens with the stored content; from there you proceed as with a new campaign: check the recipients, send yourself a test email, then send. A copy made with Duplicate is such a draft and can be sent the same way. Recipients are determined fresh when you send: anyone who received the first campaign will receive the copy as well.

Newsletter status in the contact list

In the contact list every customer contact shows a newsletter status: Subscribed (via confirmation email), Existing customer (reachable due to a booking or invoice), Unsubscribed, or Unknown (no legal basis — invite the contact to the newsletter).

Booking the module

Marketing & Newsletter is an add-on module (€49 per month or €490 per year). It is available from Core and not included in any plan — not even Scale or Enterprise. You book it directly in Marketing or under Settings → Billing → Add-on modules; with an existing subscription the amount is prorated up to the end of the current period and the module is unlocked once the payment is confirmed, usually within seconds.

You can cancel it at any time under Settings → Billing → Add-on modules; it keeps running until the end of the paid period and is not renewed afterwards. Without a booked plan, for example during the trial, the module cannot be booked — you first need a plan from Core upwards. You can still try it (see the next section).

Try it for 7 days (trial mode)

You can try the newsletter free for 7 days: in Marketing, click Try free for 7 days. During the test every feature works — writing campaigns, images and buttons, test email, invitations — but emails only go to your team:

  • Emails only go to the login addresses of your workspace members. Contacts with other addresses are skipped. To send a campaign to yourself, add yourself as a contact with your login address and invite yourself to the newsletter.
  • At most 50 recipients over the whole test — campaigns, test emails and invitations count together. You see the count at the top of the Marketing page.
  • Automatic emails to customers (no booking for a long time, birthday) start once the module is booked.

To send to your contacts for real, book the module; the purchase block is right on the Marketing page. If you don’t book, the test ends by itself after 7 days.

Included quota

The module includes 10,000 emails per calendar month; beyond that, every 1,000 emails (or part thereof) costs €5 and is billed automatically via your subscription. You can see current usage at the bottom of the marketing page. Without an active subscription, sending stops at the limit.

Unsubscribes

Every marketing email automatically contains an unsubscribe link (including one-click unsubscribe directly in the mail client). An unsubscribe takes effect immediately and permanently — the contact is excluded from campaigns and automatic emails. Undeliverable addresses and spam complaints are excluded automatically as well, protecting your sender reputation.

Univents newsletter

Three topics, pick any. Roughly once a month, no more.

Topics