Events in several rooms: assign items to rooms

If an event runs in several rooms at once (a conference with a hall, a foyer and seminar rooms), you assign each item to its room and plan per day when and how each room is used. The quote can be grouped by day, room and category on request, and you print the production list per room as a setup list.

A conference often occupies several rooms at once: stage, LED wall and microphones in the main hall, a projector and flipchart in seminar room 1, the catering in the foyer. Univents handles this as follows: one event, several rooms, every item in its room. For each item you say in which room it is needed. The quote is grouped accordingly, and each setup team gets the list for its room.

Set the rooms on the event

You enter the rooms on the event: when creating it, in the Date & venue step under Additional rooms, or later when editing. All rooms you enter are reserved for the whole duration of the event. The first room is the main room.

The room selection on items only appears once the event has at least two rooms. For an event with one room, nothing new shows up.

Room bookings per day

For a multi-day conference, not every room is used the same way every day: the hall only runs for setup from 4 pm to 8 pm on the first day, seminar 3 is set up in a U-shape on Thursday and in a circle of chairs on Friday. You record this in the Room bookings per day.

  1. Open the event’s overview. In the Location card, click Room bookings per day.
  2. For each day, the event’s rooms are listed one below the other. Tick the checkbox of every room that is used on that day.
  3. Enter from and to (e.g. 07:00 to 22:30). If you leave both empty, the whole event day applies. An end before the start means: past midnight.
  4. Under Room setup you write how the room is set up, e.g. U-shape, Theatre or Reception & catering. Univents suggests the names of the seating plans of this room and values you have already used.
  5. With Apply to all days, a room’s row applies to every day of the event. Finally, Save room bookings.

Room bookings per day are optional. Without them, the previous behavior applies: every room for the whole event. The card briefly shows what is planned, e.g. “3 bookings on 2 days”.

In the schedule: The room bookings appear in the Schedule tab as their own plan called Room occupancy – one entry per room and day. It is not part of the programme: the customer portal, function sheet, staff portal and schedule emails do not show it. As before, the rooms of the event stay blocked for the whole event time; the room bookings change nothing about availability. You can also edit the entries in the schedule, but it is best to change room, times and setup here in the dialog.

Set the room on an item

  1. Open the event's quote. The document must be a draft.
  2. Below each item name, next to Category, is the Room selection. Pick the room, e.g. Seminar room 1.
  3. Whole event means: no specific room. This is how every item stands until you select something — suitable for staff or flat fees, for example.

Several items at once: Tick the items with the checkbox on the left. In the bar above, pick the room for all ticked items under Assign room … — this is also how you set a whole section in one step.

Components of a package always stay in the room of their package and have no selection of their own.

The same goods in two rooms: If you need 5 flipcharts in the hall and 6 in seminar room 1, create two items — one per room.

Room rental: Mandatory products of a location (e.g. the room rental) that Univents books automatically when you add the room carry that room right away.

What happens to bookings and other documents

The room belongs to the event’s item, not just to this one document. If you set it in the quote, it also appears in the Bookings and in the other drafts of the event (e.g. delivery note). Documents that were sent or completed stay unchanged.

Group the PDF by room

How the items are arranged in tables in the PDF is set by the Grouping choice under PDF display. Exactly one applies at a time:

  • By category – the default: one table per category, e.g. “Technology and equipment”, “Catering”.
  • By sections and order – your sections in the document, in your order.
  • By delivery note – one table per delivery note or delivery day.
  • By room – one table per room with a subtotal. This option appears once the event has at least two rooms. With several days, each room appears per day. There is also By time: for multi-day events one table per delivery day, on a single day the categories in time order.

In the new design the same names appear above the items under View and PDF by (Sections | Time | Rooms). Under a room or day, the editor then shows the categories instead of the sections, just as the PDF prints them.

In the previous design, room grouping is called Group by room and is a switch under PDF settings.

With By room, the PDF shows one table per room, in the order of the rooms on the event, with a subtotal per room. Within a room, the items stand under their categories (e.g. “Rooms”, “Technology and equipment”, “Catering”). Items with a time are listed in time order in each room, and categories move up by their earliest time; items without a time keep their order in the document. Items without a room come last under Whole event. Rooms without items do not appear. The grand total and the VAT do not change.

If you have maintained the room bookings per day, they appear in the room heading: 07:00–22:30 Seminar 3 – 1st floor (U-shape).

Multi-day event: If items carry a delivery day (see Delivery day per item and delivery note per day), the PDF groups first by day (e.g. “Thursday, 11.06.2026”), within it by room, within that by category. The same room then appears on each of its days as its own table with its own subtotal. Items without a delivery day come last under Whole event.

Item times: In the day, room and category grouping, an item’s time appears without a date, e.g. “10:30–11:00” – the day is already shown above. If the time runs past midnight or falls on a different day, the date stays in front. If the time matches the time window in the room heading (e.g. room hire 07:00–22:30 under “07:00–22:30 Hall”), it is not repeated on the item.

Room grouping works with HTML layouts, not with Word layouts.

Room in the bookings

In the Bookings tab, the Positions view shows the Room column for events with several rooms. When you create or edit a booking item, you choose the room right in the dialog. You set ticked items together with Assign room in the bar above the list.

Setup list per room

In the Material view of the bookings there is a Room filter. Choose one or more rooms — also Whole event for everything without a room. The view then shows only what belongs in those rooms.

If you print the production list from there, it contains exactly the filtered rooms, and its header names them, e.g. “Room: Seminar room 1”. This gives the person setting up the seminar room their own list. The room filter can be combined with the delivery note and tag filters.

Copies and new versions

  • New quote version: The room of each item is kept.
  • Adopting items from another document: The room comes along.
  • Copy event: The event’s rooms, the room of each item and the room bookings per day come along; the days of the room bookings move with the new date (one week later ⇒ every day one week later).
  • Move event: In the Apply changes? dialog, the Move schedule checkbox takes the room bookings along.
  • Shorten event: If a booking then lies outside the event, the room bookings show a notice with Remove. Univents deletes nothing on its own.
  • AI assistant: Write e.g. “Set seminar 3 on Thursday to 7 am to 10:30 pm in U-shape”.
  • Removing a room from the event: If you take a room off the event, its items stand under Whole event everywhere.

What does not exist

  • Room bookings per day do not change when a room counts as taken for other events: the rooms of the event stay blocked for the whole event time. Booking pages (web shop) still check only the event time.
  • Splitting one item across several rooms. Create a separate item per room instead.
  • Stock per building (e.g. 25 pinboards in one building, 20 in another) and the packing list in the staff portal by room. For the setup teams, use the production list per room.

Univents newsletter

Three topics, pick any. Roughly once a month, no more.

Topics